Audi S3 – Fully Forged Engine | Litco Turbo | £10,000+ Engine Build By Devil Developments This is not your average Audi S3. In 2024 the engine was fully forged and rebuilt by Devil Developments at a cost of over £10,000, with around 12,000 miles covered since the build. The car is currently running a safe Stage 2 setup producing around 420BHP, but the forged setup with the turbo is capable of over 500BHP should the next owner wish to take it further. Performance Upgrades • Litco L280 Supercore Turbo • GAD Tuning ECU + TCU Remap • Trackslag 4” Titanium Downpipe • Powerflow Bespoke Welded Exhaust • MQB DI Injectors • MQB Thermostat Housing & Waterpump Fully Forged Engine Build – Devil Developments (2024) – £10,000+ (Invoice to show) • Block machined to 1st oversize • Forged rods • Forged pistons • OE crankshaft • Race bearings • New oil pump • Oil cooler • Full seals & O-rings • Head gasket • Oil & filter services (x3 since build) Cylinder Head Work • Cylinder head skim (0.004” removed) • Pressure tested • Fully cleaned and de-coked • Valves and springs stripped and assembled • Valve guides fitted and finished • 16 valve seats cut and set up • Valves cleaned and ground • 16 valve stem oil seals Brakes & Maintenance • New Brembo discs, pads all round & brake lines • Motul RBF660 high temperature brake fluid • New radiator • New spark plugs Visual Upgrades • Bespoke Starlight Roof • Carbon Maxton Front & Rear splitter • Carbon Gear Selector & Carbon Mirror Caps • Carbon Steering Wheel Factory Options: Luxurious Fine Nappa leather super sport seats in black, Light and rain sensor package LED headlights Parking Sensors