MOT till Feb 2027 Had the engine reconditioned in Dec 25 RECONDITIONING PROCESS: The following works are carried out as part of service provided: * Engine is disassembled & each part cleaned thoroughly * Crankshaft checked, reconditioned * Engine block surfaced polished * Cylinder Head Prussure Tested or skimmed if necessary * Valve seats machined * Valve lapped to ensure a tight seal * Block cylinders inspected for cracks * Cylinders machined to factory specification * Connecting rods inspected & machined if necessary * Crankshaft crack tested, ground & polished to specifications * New upgraded gas nitride ion piston, piston rings & conrod fitted * New timing Chain Kit/Timing belt/wet belt will be Replaced * New Oil pumps replaced * New Water pumps replaced (internal only) * New OEM oil seals installed * New OEM valve seals installed * New OEM big end bearings fitted * New OEM main bearings fitted * New OEM spec Eristic head gasket fitted * All bolts torqued to specification in accordance with Auto data * Assembled units oil pressure tested * Assembled units compression tested We had a new cylinder head 2 x new turbos Total work cost 7300 and has 6 months warranty. Basically this has a new engine unlike alot of the similar that will go wrong. Intermittent warning light confirmed by garage sensor needs replacing.