SUMMER PROJECT MEV Exocet mk2.5 G type. Based on the Mazda mx5 mk2.5 1.8vvti. It comes with The engine stand and floor jack and the shelf's too store all the bits. The turbo has already been recon with a new ball bearing pack and oil feeds. The shocks are gaz gold adjustable + damper with all new top mounts and fixing bolts . Skunk inlet + skunk throttle bodies all brand new.every bolt is brand new genuine mazda. new wheel Bearings and hubs front/back. Brakes and carriers upper and lower arms are brand new camber bolts and suspension bolts . New differential mounts and fixings genuine parts. I've also had 500 of extra upgrades on the tubular frame for 6 point seat harness bar has been welded in and g18 billet steel suspension mounts front and back. also the subframes front and back have been shot blasted and welded up . And the steering rack has been de powered and has all new track rods and rod ends. Also upgraded the floor pans to stainless steel they're already cut. There's so much stuff it's a bit hard to list. all I was looking for really to start with complete parts is rear upper arms and poly Bushes seats and wheels to start in a nut shell. Also I've got hundreds of strip down pictures and a fully labelled wiring loom. Paper work vehicle documents and receipts. I'm the region of 15k in parts with the kit car. The engine was running great and was serviced before It was stripped. The mileage was about 61000 on the clock that was the main reason for buying it. It's a 5 speed gear box . It Just needs to be set to a sand blaster and painted to the desired colour to start your build. Finished car weight is around 600kilos. Rear wheel drive. I'm after 6000ono. Reason for sale is lack of time to start the project due to change in circumstances.